WX-RP820
$500
The WX-RP810 is a single channel diversity receiver and the WX-RP820 is a 2-channel diversity receiver. They are designed to be used with wireless microphones WXRP110, WX-RP158 and WX-RP300, and wireless antenna WX-RP921 ENG wireless transmitter WX-RP410 can also be used with WX-RP810 and WX-RP820.
WX-RP810 may be used in a system, to receive signals from 3 separate transmitters. As many as 6 transmitters can be used in the system when an
additional WX-RP800 tuner is installed into each receiver WX-RP810. Up to 3 receivers WX-RP820 may be used in a system, to receive signals from 6 separate transmitters.
When used in conjunction with the WX-RP900 antenna distributor(s), anywhere from 2 to 10 WX-RP921's can be used as common antennas for all receivers, depending on room size.
Because this is a diversity receiver system, the occurrence of obstruction related noise and drop-outs due to poor reception areas or dead spots are rare. Digital switching provides seamless shifting between 2 antenna systems for best possible, continuous reception quality
FEATURES
The PLL synthesized Oscillator makes it simple to switch to an operating frequency clear of local interference.
The compander technique yields a dynamic range of more than 100 dB
Crystal display shows RF signal reception strength, selected antenna, presence of audio signal and receiving frequency.
LOCAL OSCILLATOR FREQUENCY is sent to the WX-RP921 Wireless Antenna for down-conversion of the carrier frequency from the wireless microphone transmitter. This allows longer cable runs between the antenna and receiver, for maximum flexibility in permanent installations.
| Key facts | |
| Shipping Information | |
| Dimensions | xx |
| Weight | |
| Shipping | $0 |
|
|
|
